Contact Us @ 760-809-1684 aztech2oservices@gmail.com Insured - Licensed & Bonded #883704
Well Water Systems - Featuring Katalox-Light Filtration Media
Katalox-Light Filtration Media - The #1 Choice for Iron, Manganese and Hydrogen Sulfide
A number of our systems contain Katalox-Light so we are providing an in-depth explanation of how it works. Katalox-Light Filtration Media which treats clear water [ferrous] iron and depending on your specific water chemistry will only require simple periodic automatic backwashing vs. chemical regeneration. As ferrous iron [dissolved iron] passes through the Katalox-Light filtration media, it is converted to ferric iron [oxidized iron] which is now a solid particulate and can be filtered-out [trapped] by the filter bed. Once the filter bed is at it's capacity of trapped iron, an automatic backwash and rinse cycle will occur which will reverse the flow of water [backwash] through the filter and expel the trapped iron particulates out of the filter bed to a nearby drain source or soil area. then, a rinse cycle will occur which will reverse the flow of water in the normal direction [downward] and settle the filter bed so it is ready for the next service cycle. The backwash and rinse procedure will typically be programmed for a total of 20 minutes and will occur typically every 5 to 7 days depending on your specific water chemistry [frequency is completely programmable via the system control valve]. Since Katalox-Light is much lighter than othre iron oxidation medias of the past, the amount of flow required for proper backwash and rinse cycles is far lessened and promotes a very effective filter bed cleaning process. This was very problematic in the past since not all of the trapped iron in the filter bed would be expelled which would result in poor system performance. Also, Katalox-Light filtration media is chemical/chlorine tolerant which will allow you to add a chemical/chlorine feed system ahead of it if needed for high levels of iron-laden water or where pH is low. Iron filtration media of the past typically was not chemical/chlorine tolerant so this was not possible. Katalox-Light filtration media has a useful life of 5 to 7 years if properly maintained. Exchanging the Katalox-Light filtration media is fairly simple with the use of an extraction tool and refill kit [sold on this site].
Katalox-Light Advantages
> Light-weight which means lower backwash flow rate requirement for effective removal of trapped [oxidized] iron from the filter bed.
> Very high surface area which means a very high filtration capacity between backwash and rinse cycles.
> Excellent filtration characteristics for removing any particulates down to a micron rating of 3 microns.
> Allows tolerance for chlorine, hydrogen peroxide or aeration pre-feed without harming the filtration media.
> Wide pH range for effective iron oxidation [6.5 to 9.0] which is crucial for natural oxidation of iron without the need of chemical pre-feed.
A number of our systems contain Katalox-Light so we are providing an in-depth explanation of how it works. Katalox-Light Filtration Media which treats clear water [ferrous] iron and depending on your specific water chemistry will only require simple periodic automatic backwashing vs. chemical regeneration. As ferrous iron [dissolved iron] passes through the Katalox-Light filtration media, it is converted to ferric iron [oxidized iron] which is now a solid particulate and can be filtered-out [trapped] by the filter bed. Once the filter bed is at it's capacity of trapped iron, an automatic backwash and rinse cycle will occur which will reverse the flow of water [backwash] through the filter and expel the trapped iron particulates out of the filter bed to a nearby drain source or soil area. then, a rinse cycle will occur which will reverse the flow of water in the normal direction [downward] and settle the filter bed so it is ready for the next service cycle. The backwash and rinse procedure will typically be programmed for a total of 20 minutes and will occur typically every 5 to 7 days depending on your specific water chemistry [frequency is completely programmable via the system control valve]. Since Katalox-Light is much lighter than othre iron oxidation medias of the past, the amount of flow required for proper backwash and rinse cycles is far lessened and promotes a very effective filter bed cleaning process. This was very problematic in the past since not all of the trapped iron in the filter bed would be expelled which would result in poor system performance. Also, Katalox-Light filtration media is chemical/chlorine tolerant which will allow you to add a chemical/chlorine feed system ahead of it if needed for high levels of iron-laden water or where pH is low. Iron filtration media of the past typically was not chemical/chlorine tolerant so this was not possible. Katalox-Light filtration media has a useful life of 5 to 7 years if properly maintained. Exchanging the Katalox-Light filtration media is fairly simple with the use of an extraction tool and refill kit [sold on this site].
Katalox-Light Advantages
> Light-weight which means lower backwash flow rate requirement for effective removal of trapped [oxidized] iron from the filter bed.
> Very high surface area which means a very high filtration capacity between backwash and rinse cycles.
> Excellent filtration characteristics for removing any particulates down to a micron rating of 3 microns.
> Allows tolerance for chlorine, hydrogen peroxide or aeration pre-feed without harming the filtration media.
> Wide pH range for effective iron oxidation [6.5 to 9.0] which is crucial for natural oxidation of iron without the need of chemical pre-feed.
List of our Well Water Treatment Systems
> Katalox-Light Filtration System
Katalox-Light Advantages
> Light-weight which means lower backwash flow rate requirement for effective removal of trapped [oxidized] iron from the filter bed.
> Very high surface area which means a very high filtration capacity between backwash and rinse cycles.
> Excellent filtration characteristics for removing any particulates down to a micron rating of 3 microns.
> Allows tolerance for chlorine, hydrogen peroxide or aeration pre-feed without harming the filtration media.
> Wide pH range for effective iron oxidation [6.5 to 9.0] which is crucial for natural oxidation of iron without the need of chemical pre-feed.
Available Options: Pre-Chemical Feed System [Enhanced Iron Oxidation for Low pH or High Iron Levels], Stainless Steel Tank Cover [Decorative + UV Ray Protection for Outside Locations], Environmental Valve Cover [Protection for Outside Locations].
Option requirements are determined upon the results a water chemistry test.
Important: It is always advised that a complete water analysis be performed to properly choose the best system for your specific situation.
We do Provide Free Well Water Sample Testing & Analysis Services for Aesthetic Purposes.
We Also Provide Comprehensive Lab Testing for Potability [Safe Water] Purposes for a Fee.
> Light-weight which means lower backwash flow rate requirement for effective removal of trapped [oxidized] iron from the filter bed.
> Very high surface area which means a very high filtration capacity between backwash and rinse cycles.
> Excellent filtration characteristics for removing any particulates down to a micron rating of 3 microns.
> Allows tolerance for chlorine, hydrogen peroxide or aeration pre-feed without harming the filtration media.
> Wide pH range for effective iron oxidation [6.5 to 9.0] which is crucial for natural oxidation of iron without the need of chemical pre-feed.
Available Options: Pre-Chemical Feed System [Enhanced Iron Oxidation for Low pH or High Iron Levels], Stainless Steel Tank Cover [Decorative + UV Ray Protection for Outside Locations], Environmental Valve Cover [Protection for Outside Locations].
Option requirements are determined upon the results a water chemistry test.
Important: It is always advised that a complete water analysis be performed to properly choose the best system for your specific situation.
We do Provide Free Well Water Sample Testing & Analysis Services for Aesthetic Purposes.
We Also Provide Comprehensive Lab Testing for Potability [Safe Water] Purposes for a Fee.
> Katalox Light + Catalytic Carbon Filtration System
Our Hybrid Systems are truly unique in their design in that they are 2 separate tanks stacked upon each other to form a single system. This provides tremendous value in your purchase since you are not buying 2 separate systems. It also decreases the amount of space [total footprint] it requires in your home.
The Katalox-Light + Catalytic Carbon Filtration System combines both the benefits of Katalox-Light filtration media [iron, manganese and hydrogen sulfide] but also adds all of the benefits of Catalytic Granular Carbon filtration media that significantly reduces multiple water-borne contaminants such as: clarity issues, general bad tastes and odors, chlorine, chloramines, hydrogen sulfide gas/odor, organic compounds - chemical compounds, pesticides, insecticides, herbicides, TCE, PCE, MTBE, VOC - DBP and many more.
Katalox-Light Advantages
> Light-weight which means lower backwash flow rate requirement for effective removal of trapped [oxidized] iron from the filter bed.
> Very high surface area which means a very high filtration capacity between backwash and rinse cycles.
> Excellent filtration characteristics for removing any particulates down to a micron rating of 3 microns.
> Allows tolerance for chlorine, hydrogen peroxide or aeration pre-feed without harming the filtration media.
> Wide pH range for effective iron oxidation [6.5 to 9.0] which is crucial for natural oxidation of iron without the need of chemical pre-feed.
Available Options: Pre-Chemical Feed System [Enhanced Iron Oxidation for Low pH or High Iron Levels], Stainless Steel Tank Cover [Decorative + UV Ray Protection for Outside Locations], Environmental Valve Cover [Protection for Outside Locations].
Option requirements are determined upon the results a water chemistry test.
Important: It is always advised that a complete water analysis be performed to properly choose the best system for your specific situation.
We do Provide Free Well Water Sample Testing & Analysis Services for Aesthetic Purposes.
We Also Provide Comprehensive Lab Testing for Potability [Safe Water] Purposes for a Fee.
The Katalox-Light + Catalytic Carbon Filtration System combines both the benefits of Katalox-Light filtration media [iron, manganese and hydrogen sulfide] but also adds all of the benefits of Catalytic Granular Carbon filtration media that significantly reduces multiple water-borne contaminants such as: clarity issues, general bad tastes and odors, chlorine, chloramines, hydrogen sulfide gas/odor, organic compounds - chemical compounds, pesticides, insecticides, herbicides, TCE, PCE, MTBE, VOC - DBP and many more.
Katalox-Light Advantages
> Light-weight which means lower backwash flow rate requirement for effective removal of trapped [oxidized] iron from the filter bed.
> Very high surface area which means a very high filtration capacity between backwash and rinse cycles.
> Excellent filtration characteristics for removing any particulates down to a micron rating of 3 microns.
> Allows tolerance for chlorine, hydrogen peroxide or aeration pre-feed without harming the filtration media.
> Wide pH range for effective iron oxidation [6.5 to 9.0] which is crucial for natural oxidation of iron without the need of chemical pre-feed.
Available Options: Pre-Chemical Feed System [Enhanced Iron Oxidation for Low pH or High Iron Levels], Stainless Steel Tank Cover [Decorative + UV Ray Protection for Outside Locations], Environmental Valve Cover [Protection for Outside Locations].
Option requirements are determined upon the results a water chemistry test.
Important: It is always advised that a complete water analysis be performed to properly choose the best system for your specific situation.
We do Provide Free Well Water Sample Testing & Analysis Services for Aesthetic Purposes.
We Also Provide Comprehensive Lab Testing for Potability [Safe Water] Purposes for a Fee.
> Katalox Light + Whole House Softener System
The Hybrid - Katalox Light + Water Softener System utilizes Katalox-Light Filtration Media + a separate Water Softener lower tank which treats clear water [ferrous] iron and water hardness [lime scale/dissolved calcium]. As ferrous iron [dissolved iron] and water hardness [dissolved calcium] passes through the system, these unwanted contaminants are trapped in the filtration bed. Once the system is at it's capacity of trapped iron and water hardness, an automatic regeneration process will occur which will physically remove any trapped iron and calcium to a nearby drain source. this procedure requires the use of a concentrated brine solution [salt or potassium chloride] to dislodge the calcium [water hardness] from the bond of the softening resin beads so it is ready for the next service cycle. The regeneration procedure will typically be programmed for a total of 100 minutes and will occur typically every 5 to 7 days depending on your specific water chemistry [frequency is completely programmable via the system control valve]. Some of the main advantages of Katalox-Light media is that it is much lighter than iron oxidation medias of the past, the amount of flow required for proper backwash and rinse cycles is far lessened and very effective filter bed cleaning can be achieved. This was very problematic in the past since not all of the trapped iron in the filter bed would be expelled which would result in poor system performance. Also, Katalox-Light filtration media is chemical/chlorine tolerant which will allow you to add a chemical/chlorine feed system ahead of it if needed [for high level of iron-laden water or where pH is low]. iron filtration media of the past typically was not chemical/chlorine tolerant so this was not possible. Katalox-Light filtration media has a useful life of 5 to 7 years if properly maintained. Exchanging the Katalox-Light filtration media is fairly simple with the use of an extraction tool and refill kit [sold on this site].
As a bonus, the Water Softener tank adds the benefit of hard water removal which provides your home with the benefits of soft water. Such benefits include - water-using appliance and plumbing fixture protection from hard water scale buildup. This can result in major cost savings over time. Additionally, soft water provides many aesthetic benefits such as better grooming benefits [hair & skin] - laundry benefits [more vibrant colors & less deterioration of fabrics] and it provides a spot-free environment on glassware, dishware, glass shower doors, etc.
Katalox-Light Advantages
> Light-weight which means lower backwash flow rate requirement for effective removal of trapped [oxidized] iron from the filter bed.
> Very high surface area which means a very high filtration capacity between backwash and rinse cycles.
> Excellent filtration characteristics for removing any particulates down to a micron rating of 3 microns.
> Allows tolerance for chlorine, hydrogen peroxide or aeration pre-feed without harming the filtration media.
> Wide pH range for effective iron oxidation [6.5 to 9.0] which is crucial for natural oxidation
Available Options: Pre-Chemical Feed System [Enhanced Iron Oxidation for Low pH or High Iron Levels], Stainless Steel Tank Cover [Decorative + UV Ray Protection for Outside Locations], Environmental Valve Cover [Protection for Outside Locations].
Option requirements are determined upon the results a water chemistry test.
Important: It is always advised that a complete water analysis be performed to properly choose the best system for your specific situation.
We do Provide Free Well Water Sample Testing & Analysis Services for Aesthetic Purposes.
We Also Provide Comprehensive Lab Testing for Potability [Safe Water] Purposes for a Fee.
As a bonus, the Water Softener tank adds the benefit of hard water removal which provides your home with the benefits of soft water. Such benefits include - water-using appliance and plumbing fixture protection from hard water scale buildup. This can result in major cost savings over time. Additionally, soft water provides many aesthetic benefits such as better grooming benefits [hair & skin] - laundry benefits [more vibrant colors & less deterioration of fabrics] and it provides a spot-free environment on glassware, dishware, glass shower doors, etc.
Katalox-Light Advantages
> Light-weight which means lower backwash flow rate requirement for effective removal of trapped [oxidized] iron from the filter bed.
> Very high surface area which means a very high filtration capacity between backwash and rinse cycles.
> Excellent filtration characteristics for removing any particulates down to a micron rating of 3 microns.
> Allows tolerance for chlorine, hydrogen peroxide or aeration pre-feed without harming the filtration media.
> Wide pH range for effective iron oxidation [6.5 to 9.0] which is crucial for natural oxidation
Available Options: Pre-Chemical Feed System [Enhanced Iron Oxidation for Low pH or High Iron Levels], Stainless Steel Tank Cover [Decorative + UV Ray Protection for Outside Locations], Environmental Valve Cover [Protection for Outside Locations].
Option requirements are determined upon the results a water chemistry test.
Important: It is always advised that a complete water analysis be performed to properly choose the best system for your specific situation.
We do Provide Free Well Water Sample Testing & Analysis Services for Aesthetic Purposes.
We Also Provide Comprehensive Lab Testing for Potability [Safe Water] Purposes for a Fee.
> Ecomix - Well Water Softener
The Ecomix Well Water Softener System is specifically designed for well water applications. Most standard water softener systems are not suited for most well water applications since water chemistry can vary greatly from one well source to another. Also, there will be the additional contaminants in addition to water hardness such as iron. In many cases, standard water softeners are subjected to media fouling which will render your standard water softener useless. The Ecomix system not only has the ability to remove water hardness from your well water supply but it can also significantly reduce ferrous iron, ferric iron, manganese and tannins. This creates incredible value to your purchase since you can treat multiple contaminants in a single system. Most impressively, the Ecomix System has a very broad pH operating range [5.0 to 9.0]. This is significant because pH is a crucial variable when it comes to well water contaminant reduction especially as it relates to ferrous iron which is typically the main issue with well water sources. The Ecomix system can also significantly reduce tannins which is typically present in specific regional areas of the United States. Normally, if you wish to treat both water hardness along with tannins, you will need multiple treatment systems. The Ecomix system eliminates the need for multiple systems. The Ecomix system functions in the same manner as a standard water softener in that it regenerates itself with sodium or potassium chloride [water softener salt]. No chemicals are required. The Ecomix media is certified in compliance with NSF/Ansi standards: NSF/ANSI standard 44 for residential cation exchange for water softeners - NSF/ANSI standard 61 for drinking water systems [health affects] - NSF/ANSI standard 372 drinking water systems [lead content]. We do recommend our Flushable Mesh Screen Filter be installed ahead of the Ecomix system to keep suspended solids of a certain size from entering the system. This filter is easy to install, does not require filter cartridges and can be easily flushed with just a turn of a knob.
Available Options: Stainless Steel Tank Cover [Decorative + UV Ray Protection for Outside Locations], Environmental Valve Cover [Protection for Outside Locations].
Option requirements are determined upon the results a water chemistry test.
Important: It is always advised that a complete water analysis be performed to properly choose the best system for your specific situation.
We do Provide Free Well Water Sample Testing & Analysis Services for Aesthetic Purposes.
We Also Provide Comprehensive Lab Testing for Potability [Safe Water] Purposes for a Fee.
Available Options: Stainless Steel Tank Cover [Decorative + UV Ray Protection for Outside Locations], Environmental Valve Cover [Protection for Outside Locations].
Option requirements are determined upon the results a water chemistry test.
Important: It is always advised that a complete water analysis be performed to properly choose the best system for your specific situation.
We do Provide Free Well Water Sample Testing & Analysis Services for Aesthetic Purposes.
We Also Provide Comprehensive Lab Testing for Potability [Safe Water] Purposes for a Fee.
> Nitrate Select System
Nitrate is a naturally occurring chemical compound that is formed in the soil when nitrogen and oxygen combine. Small amounts of nitrate are normal but elevated levels in groundwater can cause negative health affects. The main source of nitrates is from most fertilizers, manure, and liquid waste discharged from septic tanks. When rain or flowing irrigation water is present, nitrates get carried away and eventually permeate into the soil and to the groundwater table. Ultimately, a portion of the nitrates make their way into your potable well water supply.
It is recommended that you have your well tested for nitrate and biological levels every 1 to 3 years. However, if you notice any signs of a significant change in water quality it is recommended to have your water tested by a certified lab more frequently. As established by the EPA, the maximum contaminant level (MCL) for Nitrate-N is 10 ppm (also known as mgl). Low levels of nitrate ingestion is not harmful. However, high levels in the body can be converted to nitrite. Elevated Nitrite levels in an adult's body is typically not problematic due to low pH levels in the stomach destroys the nitrite but infants [3 months or less old] can be at risk since their digestive system has not fully developed. Methemoglobinemia [blue-baby syndrome] can be the result in infants when nitrite levels are elevated. In these instances, the nitrites can oxygen starvation thus name "blue-baby syndrome.
A Nitrate Select Resin System is very much like a regular water softener except the it is bedded with anion resin vs. cation resin. Anion resin attracts negative ions, such as Nitrates, and significantly reduces levels within acceptable and safe parameters for ingestion. A Nitrate Select Resin system regenerates with sodium or potassium chloride once the digital control valve has measured the maximum of water throughput. Once the system has regenerated, the system goes back in service for the next service cycle. Well waters with total hardness that exceeds 7 grains per gallon should be softened prior to entering the Nitrate Select system. We also recommend our Citric Resin cleaner to periodically clean the Nitrate Select resin - approx every 6 months. Just simply add to the brine [salt] tank and perform a manual regeneration. This will greatly increase the useful life and performance of the resin.
Available Options: Stainless Steel Tank Cover [Decorative + UV Ray Protection for Outside Locations], Environmental Valve Cover [Protection for Outside Locations].
Option requirements are determined upon the results a water chemistry test.
Important: It is always advised that a complete water analysis be performed to properly choose the best system for your specific situation.
We do Provide Free Well Water Sample Testing & Analysis Services for Aesthetic Purposes.
We Also Provide Comprehensive Lab Testing for Potability [Safe Water] Purposes for a Fee.
It is recommended that you have your well tested for nitrate and biological levels every 1 to 3 years. However, if you notice any signs of a significant change in water quality it is recommended to have your water tested by a certified lab more frequently. As established by the EPA, the maximum contaminant level (MCL) for Nitrate-N is 10 ppm (also known as mgl). Low levels of nitrate ingestion is not harmful. However, high levels in the body can be converted to nitrite. Elevated Nitrite levels in an adult's body is typically not problematic due to low pH levels in the stomach destroys the nitrite but infants [3 months or less old] can be at risk since their digestive system has not fully developed. Methemoglobinemia [blue-baby syndrome] can be the result in infants when nitrite levels are elevated. In these instances, the nitrites can oxygen starvation thus name "blue-baby syndrome.
A Nitrate Select Resin System is very much like a regular water softener except the it is bedded with anion resin vs. cation resin. Anion resin attracts negative ions, such as Nitrates, and significantly reduces levels within acceptable and safe parameters for ingestion. A Nitrate Select Resin system regenerates with sodium or potassium chloride once the digital control valve has measured the maximum of water throughput. Once the system has regenerated, the system goes back in service for the next service cycle. Well waters with total hardness that exceeds 7 grains per gallon should be softened prior to entering the Nitrate Select system. We also recommend our Citric Resin cleaner to periodically clean the Nitrate Select resin - approx every 6 months. Just simply add to the brine [salt] tank and perform a manual regeneration. This will greatly increase the useful life and performance of the resin.
Available Options: Stainless Steel Tank Cover [Decorative + UV Ray Protection for Outside Locations], Environmental Valve Cover [Protection for Outside Locations].
Option requirements are determined upon the results a water chemistry test.
Important: It is always advised that a complete water analysis be performed to properly choose the best system for your specific situation.
We do Provide Free Well Water Sample Testing & Analysis Services for Aesthetic Purposes.
We Also Provide Comprehensive Lab Testing for Potability [Safe Water] Purposes for a Fee.
> pH Neutralizing System
Well water with low pH can cause corrosion of copper plumbing and bluish/green staining on plumbing fixtures. Calcium Carbonate + Magnesium Dioxide [Calcite] are combined and are commonly used for pH neutralization. Calcium Carbonate is typically used when the pH levels fall between 5 to 7 on the pH scale. If your well water is as low as 4.0, then Corosex will be effective. Corosex is also more effective at variable flow rates. Both Calcite and Corosex are a sacrificial media meaning that it will deplete over time. Given that fact, the tank has to be replenished periodically. This is a specially designed tank with a threaded plug port on the side which allows for easy refilling. It is advised that you test water periodically for existing pH level to indicate when replenishment is required. You can also backlight the tank to check media level. The Pentair 5810 Digital Control Valve will initiate an automatic backwash and rinse cycle to ensure that the media stays loose and fluid.
Available Options: Stainless Steel Tank Cover [Decorative + UV Ray Protection for Outside Locations], Environmental Valve Cover [Protection for Outside Locations].
Important: It is always advised that a complete water analysis be performed to properly choose the best system for your specific situation.
We do Provide Free Well Water Sample Testing & Analysis Services for Aesthetic Purposes.
We Also Provide Comprehensive Lab Testing for Potability [Safe Water] Purposes for a Fee.
Available Options: Stainless Steel Tank Cover [Decorative + UV Ray Protection for Outside Locations], Environmental Valve Cover [Protection for Outside Locations].
Important: It is always advised that a complete water analysis be performed to properly choose the best system for your specific situation.
We do Provide Free Well Water Sample Testing & Analysis Services for Aesthetic Purposes.
We Also Provide Comprehensive Lab Testing for Potability [Safe Water] Purposes for a Fee.
> Katalox Light + O2 [Oxygen] System
Iron Filtration with the added power of Oxygen. When it comes to removing iron from a well water supply, oxidation is king! when the level of iron is low to moderate, simple Katalox-Light filtration is satisfactory to naturally oxidize the dissolved iron into suspended iron which then gets trapped in the filter bed where it is periodically flushed-out by the automatic control valve. However, when the iron level is moderate to high, additional assistance may be required to effectively oxidize the dissolved iron so that it can be filtered-out from the well water supply. This is where the Micronizer Air Injection Valve comes into play. Oxygen is contained in most water supplies but not usually enough of it to effectively oxidize certain levels of iron. Thus, we add the Micronizer to naturally induce oxygen into the water for enhanced dissolved iron oxidation. So, the combination of Katalox-Light [oxidation media] plus oxygen inducement is ideal for more difficult iron related issues. Since this is basically a Katalox-Light System, you can refer back to the Katalox-Light + Carbon and Katalox-Light + Softener system details to educate yourself on the merits of Katalox-Light filtration.
Available Options: Pre-Chemical Feed System [Enhanced Iron Oxidation for Low pH or High Iron Levels], Stainless Steel Tank Cover [Decorative + UV Ray Protection for Outside Locations], Environmental Valve Cover [Protection for Outside Locations].
Option requirements are determined upon the results a water chemistry test.
Important: It is always advised that a complete water analysis be performed to properly choose the best system for your specific situation.
We do Provide Free Well Water Sample Testing & Analysis Services for Aesthetic Purposes.
We Also Provide Comprehensive Lab Testing for Potability [Safe Water] Purposes for a Fee.
Available Options: Pre-Chemical Feed System [Enhanced Iron Oxidation for Low pH or High Iron Levels], Stainless Steel Tank Cover [Decorative + UV Ray Protection for Outside Locations], Environmental Valve Cover [Protection for Outside Locations].
Option requirements are determined upon the results a water chemistry test.
Important: It is always advised that a complete water analysis be performed to properly choose the best system for your specific situation.
We do Provide Free Well Water Sample Testing & Analysis Services for Aesthetic Purposes.
We Also Provide Comprehensive Lab Testing for Potability [Safe Water] Purposes for a Fee.
> Katalox-Light + Oxy-Mag - Salt-Free Scale Prevention + Iron Filtration System
This system is an alternative version of our popular Katalox-Light Iron Filtration System Series but instead of a traditional water softening approach where salt is required for system regeneration - this system provides a Salt-Free approach. This is achieved by including the very effective Oxy-Mag Scale Prevention Module down the center of the tank where it converts hard water scale minerals [calcium] to harmless calcium clusters that pass thru to the household drain system versus depositing on your household surfaces. The Oxy-Mag is a strong tri-pole neodymium magnetic module. Magnetic water conditioning has a long history that goes back to 1894. It was borne out of the desire to avoid the undesirable inclusion of salt-based water softener regeneration in large commercial/industrial applications. Eventually, this technology was scaled-down so that it was practical to use in residential applications. There are a multitude of magnetic water treatment systems on the market today and some far better than others. The Oxy-Mag Module was constructed to be one of the very best magnetic water conditioning units available for residential use.
Available Options: Pre-Chemical Feed System [Enhanced Iron Oxidation for Low pH or High Iron Levels], Stainless Steel Tank Cover [Decorative + UV Ray Protection for Outside Locations], Environmental Valve Cover [Protection for Outside Locations].
Option requirements are determined upon the results a water chemistry test.
Important: It is always advised that a complete water analysis be performed to properly choose the best system for your specific situation.
We do Provide Free Well Water Sample Testing & Analysis Services for Aesthetic Purposes.
We Also Provide Comprehensive Lab Testing for Potability [Safe Water] Purposes for a Fee.
Available Options: Pre-Chemical Feed System [Enhanced Iron Oxidation for Low pH or High Iron Levels], Stainless Steel Tank Cover [Decorative + UV Ray Protection for Outside Locations], Environmental Valve Cover [Protection for Outside Locations].
Option requirements are determined upon the results a water chemistry test.
Important: It is always advised that a complete water analysis be performed to properly choose the best system for your specific situation.
We do Provide Free Well Water Sample Testing & Analysis Services for Aesthetic Purposes.
We Also Provide Comprehensive Lab Testing for Potability [Safe Water] Purposes for a Fee.
Our Well Water approach is to start from the ground-up. We collect a water sample and test it before we even make a recommendation for treating your water. There are several variables to consider to best evaluate and recommend a well water treatment system. Schedule your onsite appointment today.
Aztec H2O Services
2282 Holly Ave.
Escondido, CA 92027
(760) 809-1684
2282 Holly Ave.
Escondido, CA 92027
(760) 809-1684