760-809-1684
aztech2oservices@gmail.com |
www.aztech2o.com
30+ Years of Experience |
Water Treatment Chemicals & Services
Cooling Water Treatment
CW409 Cooling Tower Treatment
Concentrated 7.5 ounces treats 1000 gallons of cooling tower makeup water at 3-cycles of mineral concentration. Simple to test; safe to use. Protect iron, steel, brass and copper. Suspends and disperses dirt, scale, and hardness compounds.
Product Description
Concentrated 7.5 ounces treats 1000 gallons of cooling tower makeup water at 3-cycles of mineral concentration. Simple to test; safe to use. Protect iron, steel, brass and copper. Suspends and disperses dirt, scale, and hardness compounds.
Product Description
- Concentrated: 7.5 ounces treats 1000 gallons of cooling tower makeup water at 3-cycles of mineral concentration.
- Can be tested in less than 30-seconds with a simple test kit.
- Contains a powerful blend of organic phosphonates with polymeric dispersants/crystal modifying compounds for control of scale in cooling systems with extreme hard and alkaline water without the use of acid.
- Contains a dual polymeric dispersing system for calcium carbonate, sulfates, iron and dirt particles. This chemical will help keep the cooling system cleaner and will aid in removing old scale that may have developed in the cooling tower.
- Utilizes a robust and resilient filming corrosion protector chemical that helps reduce iron and mild steel corrosion.
- Has added copper/brass corrosion inhibitors that are resistant to oxidizing chemicals such as chlorine and bromine.
- CW409 is intended for use in re-circulating cooling systems and cooling towers to control scale and corrosion.
- Use O.P. Test Kit P.N.#CNPK158 to test CW-409. The recommended test range is 10 ? 20 total drops. If the test results are high or low, see Cannon Water Technology Inc.'s "What To Do If Test Results Are Out Of Range".
- CW409 contains no heavy metals or restricted ingredients and water treated with CW409 can be discharged to sanitary sewer. Avoid discharging any cooling tower water to storm drains or open bodies of water.
- Oxidizing biocides such as chlorine and bromine can be used in systems treated with CW409 so long as the concentration of chlorine or bromine does not exceed 3 ppm.
- CW409 is compatible with all non-oxidizing biocides with the exception of cationic quaternary ammonium compounds.
- CW409 can be shipped UPS in 5 gallon containers. Larger sizes shipped by common carrier.
CW509 Maximum Cycle Cooling Tower Treatment
Super concentrated; 2.5 ounces treats 1000 gallons of cooling tower makeup water at 3-cycles of mineral concentration. Simple to test, safe to use, has corrosion protecting chemicals for iron, steel, brass and copper. Suspends and disperses dirt, scale.
Product Description
Super concentrated; 2.5 ounces treats 1000 gallons of cooling tower makeup water at 3-cycles of mineral concentration. Simple to test, safe to use, has corrosion protecting chemicals for iron, steel, brass and copper. Suspends and disperses dirt, scale.
Product Description
- Super concentrated: 2.5 ounces treats 1000 gallons of cooling tower makeup water at 3-cycles of mineral concentration.
- Can be tested in less than 30-seconds with a simple test kit.
- Contains a powerful blend of organic phosphonates with polymeric dispersants/crystal modifying compounds for control of scale in cooling systems with extreme hard and alkaline water without the use of acid.
- Contains a dual polymeric dispersing system for calcium carbonate, sulfates, iron and dirt particles. This chemical will help keep the cooling system cleaner and will aid in removing old scale that may have developed in the cooling tower.
- Utilizes a robust and resilient filming corrosion protector chemical that helps reduce iron and mild steel corrosion.
- Has added copper/brass corrosion inhibitors that are resistant to oxidizing chemicals such as chlorine and bromine.
- CW509 is intended for use in re-circulating cooling systems and cooling towers to control scale and corrosion.
- Use O.P. Test Kit P.N.#CNPK158 to test CW-509. The recommended test range is 10 - 20 total drops. If the test results are high or low, see Cannon Water Technology Inc.’s “What To Do If Test Results Are Out Of Range”.
- CW509 contains no heavy metals or restricted ingredients and water treated with CW509 can be discharged to sanitary sewer. Avoid discharging any cooling tower water to storm drains or open bodies of water.
- Oxidizing biocides such as chlorine and bromine can be used in systems treated with CW509 so long as the concentration of chlorine or bromine does not exceed 3 ppm.
- CW509 is compatible with all non-oxidizing biocides with the exception of cationic quaternary ammonium compounds.
- CW509 can be shipped UPS in 5 gallon containers. Larger sizes shipped by common carrier.
Steam Boiler Treatment
409 Steam Boiler Treatment
All-In-One Steam Boiler Treatment for Steam Systems with steam lines less than 1000 feet and steam losses greater than 20%. -- FDA/USDA guideline ingredients. -- Simple To Test
Product Description
All-In-One Steam Boiler Treatment for Steam Systems with steam lines less than 1000 feet and steam losses greater than 20%. -- FDA/USDA guideline ingredients. -- Simple To Test
Product Description
- Designed for steam boilers where more than 80% of the steam condenses into water and returns to the boiler as condensate. Easy to apply. Easy to test. Can be shipped UPS Ground in 5-gallon containers.
- Balanced blend of nitrite, borax, azole and polymeric organic dispersants. Protects iron, copper and brass metals.
- Has dedicated iron oxide dispersants to retard rust deposits.
- Contains a steam line treatment that neutralizes low acidic pH in the condensate return lines.
- Can be used on steam boilers that have hard water makeup, however, for best results soften makeup water.
- BW409 is intended for use in boilers operating in the low and medium pressure range below 300 psi.
- This boiler chemistry has been successfully used in schools, high-rise buildings and apartment buildings where steam is used for heating and there is less than 20% loss of condensate.
- BW409 can be fed by hand or with a chemical metering pump connected to the feed water storage tank or feed water line. If possible, interlock the chemical metering pump to the boiler feed water pump so that chemical is fed in proportion to load. Feed one gallon per 100 gallons of boiler water.
- Use Nitrite Test Kit P.N.# CNTK3300-Z to test for BW409. The recommended test range is 800 - 1500 ppm as Sodium Nitrite.
- Log test results. Read Cannon Water Technology Inc.’s “Basic Steam Boiler Water Treatment”.
BW629 Steam Boiler Treatment
All-In-One Steam Boiler Treatment for Steam Systems with steam lines less than 1000 feet and steam losses greater than 20%. -- FDA/USDA guideline ingredients. -- Simple To Test
Product Description
All-In-One Steam Boiler Treatment for Steam Systems with steam lines less than 1000 feet and steam losses greater than 20%. -- FDA/USDA guideline ingredients. -- Simple To Test
Product Description
- Concentrated: 14-21 ounces treats 1,000 gallons of feed water.
- Balanced blend of alkalinity boosters, sulfite oxygen scavengers and polymeric organic dispersants.
- Has dedicated iron oxide dispersants to retard rust deposits.
- Contains a steam line treatment that neutralizes low acidic pH in the condensate return lines.
- Can be used on steam boilers that have hard water makeup, however, for best results soften makeup water.
- Ingredients in BW629 meet FDA/USDA guidelines for use in treating boilers where the steam produced may contact edible food products.
- BW629 is intended for use in boilers operating in the low and medium pressure range below 300 psi.
- BW629 should be fed with a chemical metering pump in to the feed water storage tank or feed water line. If possible, interlock the chemical metering pump to the boiler feed water pump so that chemical is fed in proportion to load.
- Use Sulfite Test Kit P.N.# CNTK3502-Z to test for BW629. The recommended test range is 30-60 ppm as Sulfite.
- Log test results. Read Cannon Water Technology Inc. Basic Steam Boiler Water Treatment.
Closed System Treatment
CS402PD Closed System Treatment
Helps Prevent Corrosion in Closed Hot and Chill Water Systems
Chill, Hot and Condenser Closed System Treatment: One Gallon Treats 200 gallons of water. Simple to test. Protects Iron, Steel, Brass and Copper. Contains a visible red dye.
Product Description
Helps Prevent Corrosion in Closed Hot and Chill Water Systems
Chill, Hot and Condenser Closed System Treatment: One Gallon Treats 200 gallons of water. Simple to test. Protects Iron, Steel, Brass and Copper. Contains a visible red dye.
Product Description
- Unique blend of Nitrite/Borax based corrosion control compounds for iron and steel metal protection. CS402PD contains a visible red dye..
- Incorporates an organic azole compound resistant to oxidizing degradation for corrosion control of yellow metal compounds, copper and brass.
- Has dedicated iron oxide dispersants to retard rust deposits plugging lines and creating under deposit corrosion cells.
- Forms a resistant protective barrier film on metal surfaces that helps prevent oxygen from attacking metal surfaces.
- pH buffered with a borax for long term pH stability.
- Utilizes a polymeric dispersant to help reduce Calcium Hardness scale from forming on heat exchanger surfaces.
- Compatible with Ethylene Glycol/Propylene Glycol/GreenFrost-100 anti-freeze chemicals.
- CS402PD should be fed at a rate of 1 gallon per 200 gallons of water in the closed system.
ECO-Green - CST Closed System Treatment
Safe - Helps Prevent Corrosion in Closed Hot and Chill Water Systems
Product Description
- Super concentrated: 1 - 2 gallons treats 1000 gallons of closed chill, hot and condenser water.
- Incorporates an organic azole compound resistant to oxidizing degradation for corrosion control of yellow metal compounds, Copper and Brass.
- Has a dedicated iron oxide dispersants to retard rust deposits plugging lines and creating under deposit corrosion cells.
- Forms a resistant protective barrier film on metal surfaces that helps prevent oxygen from attacking metal surfaces.
- pH buffered with a Borax for long term pH stability.
- Less likely to be degraded by bacteria than other closed system corrosion inhibitors.
- Can be used in systems currently treated with nitrite/phosphate/phosphonates based corrosion inhibitors.
- Compatible with Ethylene Glycol/Propylene Glycol/GreenFrost-100 anti-freeze chemicals.
- ECO-Green - CST should be fed at a rate of 1 -2 gallons per 1000 gallons of water in the closed system.
- Use O.P. Test Kit P.N. CNPK158 to test ECO-Green - CST. The recommended test range is 25 - 40 total drops.
- ECO-Green - CST can be shipped UPS in small containers.
ECO-Green - CST Closed System Treatment
Safe - Helps Prevent Corrosion in Closed Hot and Chill Water Systems
Product Description
- Super concentrated: 1 - 2 gallons treats 1000 gallons of closed chill, hot and condenser water.
- Incorporates an organic azole compound resistant to oxidizing degradation for corrosion control of yellow metal compounds, Copper and Brass.
- Has a dedicated iron oxide dispersants to retard rust deposits plugging lines and creating under deposit corrosion cells.
- Forms a resistant protective barrier film on metal surfaces that helps prevent oxygen from attacking metal surfaces.
- pH buffered with a Borax for long term pH stability.
- Less likely to be degraded by bacteria than other closed system corrosion inhibitors.
- Can be used in systems currently treated with nitrite/phosphate/phosphonates based corrosion inhibitors.
- Compatible with Ethylene Glycol/Propylene Glycol/GreenFrost-100 anti-freeze chemicals.
- ECO-Green - CST should be fed at a rate of 1 -2 gallons per 1000 gallons of water in the closed system.
- Use O.P. Test Kit P.N. CNPK158 to test ECO-Green - CST. The recommended test range is 25 - 40 total drops.
- ECO-Green - CST can be shipped UPS in small containers.
SENTINEL X100RD RAPID DOSE INHIBITOR
Sentinel X100RD Rapid Dose Inhibitor provides protection for clean hydronic heating systems against limescale and corrosion. Suitable for use in all types of indirect heating system, Sentinel X100RD Inhibitor will extend the life of the system, ensuring maximum efficiency and minimizing fuel usage.
KEY FEATURES:
- Heavy duty rust inhibitor
- Safe for aluminum heat exchangers
- Protects against limescale and corrosion
- TripleTech™ Anti-Corrosion Technology
- Suitable for all system metals
- pH neutral formulation
- Ensures optimum system efficiency
- Suitable for hard, soft and artificially softened water
- Helps prevent the formation of hydrogen gas
1 Quart of Sentinel X100RD inhibitor is sufficient to treat a typical residential system of 25 Gallons. Larger systems should be dosed at 1% of system water.
For best results, systems should be cleaned and flushed with clean make-up water prior to adding Sentinel X100.
Reverse Osmosis Care Products
ANTISCALANTS | Vitec®
Vitec® antiscalants are multicomponent formulations that allow higher RO system recovery and reduce cleaning frequency.
CLEANERS | AvistaClean® and RoClean
AvistaClean® and RoClean are proprietary, membrane compatible formulations that provide efficient and cost-effective removal of all common foulants.
BIOCIDES | RoCide®
RoCide® is a line of non-oxidizing, membrane compatible biocides used to reduce biological fouling in non-potable membrane systems.
CHLORINE SCAVENGERS | AntiChlor
AntiChlor formulations remove free and combined chlorine from RO system feedwaters to protect membranes from oxidation damage.
Vitec® antiscalants are multicomponent formulations that allow higher RO system recovery and reduce cleaning frequency.
CLEANERS | AvistaClean® and RoClean
AvistaClean® and RoClean are proprietary, membrane compatible formulations that provide efficient and cost-effective removal of all common foulants.
BIOCIDES | RoCide®
RoCide® is a line of non-oxidizing, membrane compatible biocides used to reduce biological fouling in non-potable membrane systems.
CHLORINE SCAVENGERS | AntiChlor
AntiChlor formulations remove free and combined chlorine from RO system feedwaters to protect membranes from oxidation damage.
Antiscalants
Antiscalants
Vitec® antiscalants and dispersants are multicomponent formulations that allow higher RO system recovery rates and reduce cleaning frequency.
Our Vitec antiscalants inhibit scale while also dispersing colloidal particles. The inhibition and dispersant properties of Vitec products help extend system run times, reduce cleaning frequency and increase the productive life of RO elements. The Vitec 8000 series antiscalants are part of our Green Chemicals line, specially formulated for sites with discharge restrictions.
Vitec® 3000
Vitec® 3000 is a powerful, broad spectrum, liquid antiscalant and dispersant that is compatible with organic coagulants. It is highly effective at low dose rates and in a wide range of feedwaters and is certified for use in systems producing drinking water.
Vitec® 5100
Vitec® 5100 is a broad spectrum, liquid antiscalant and dispersant that is compatible with organic coagulants, effective at low dose rates and approved for use in systems producing drinking water. It is particularly cost-effective in seawater and municipal applications.
Vitec® 1500
Vitec® 1500 is a liquid antiscalant designed to inhibit or reduce calcium fluoride, calcium sulfate, calcium carbonate, calcium phosphate, barium sulfate, and strontium sulfate scale.
Vitec® 2000
Vitec® 2000 is a liquid antiscalant and dispersant used in feedwaters that have a wide range of scaling challenges or where there is a high level of iron to be dispersed.
Vitec® 4000
Vitec® 4000 is a liquid antiscalant and dispersant that offers excellent silica scale inhibition and allows increased system recoveries in high silica feedwaters. It is certified for use in systems producing drinking water.
Vitec® 7000
Vitec® 7000 is a multicomponent liquid antiscalant and dispersant that provides a high level of sulfate inhibition and allows increased RO system recoveries in challenging waters.
Vitec® 1000
Vitec® 1000 is a liquid antiscalant used when the potential for colloidal and silt fouling of membranes is low. This formulation is compatible with all RO membranes and is certified for use in systems producing drinking water.
Vitec® 8200
GreenVitec® 8200 liquid antiscalant and dispersant is free of phosphate and phosphonate. This all-polymer blend is compatible with all membrane types and is NSF certified for use in systems producing drinking water.
Vitec® 1100
Vitec® 1100 is a cost effective, liquid antiscalant designed to specifically inhibit calcium carbonate, metal oxides, silica, and mineral scale in municipal feedwaters where there is potential for concentrations of inorganic fouling.
Vitec® 1200
Vitec® 1200 is a liquid antiscalant designed with enhanced scale control to inhibit iron metal oxides, silica, and mineral scale in large capacity membrane systems.
Vitec® 1400
Vitec® 1400 is a liquid antiscalant designed to inhibit calcium carbonate, calcium sulfate, metal oxides, silica, barium and strontium scale in municipal feedwaters where there is potential for high concentrations of inorganic fouling, or high hardness ground waters.
Vitec® 1500
Vitec® 1500 is a liquid antiscalant designed to inhibit or reduce calcium fluoride, calcium sulfate, calcium carbonate, calcium phosphate, barium sulfate, and strontium sulfate scale.
Vitec® 5000
Vitec 5000 is a liquid antiscalant and dispersant used to control scale and inorganic fouling in a variety of feedwater pH ranges. It is a powerful inhibitor against carbonate and sulfate scales and is certified for use in systems producing drinking water.
Vitec® 3000
Vitec® 3000 is a powerful, broad spectrum, liquid antiscalant and dispersant that is compatible with organic coagulants. It is highly effective at low dose rates and in a wide range of feedwaters and is certified for use in systems producing drinking water.
Vitec® 5100
Vitec® 5100 is a broad spectrum, liquid antiscalant and dispersant that is compatible with organic coagulants, effective at low dose rates and approved for use in systems producing drinking water. It is particularly cost-effective in seawater and municipal applications.
Vitec® 7000
Vitec® 7000 is a multicomponent liquid antiscalant and dispersant that provides a high level of sulfate inhibition and allows increased RO system recoveries in challenging waters.
Vitec® antiscalants and dispersants are multicomponent formulations that allow higher RO system recovery rates and reduce cleaning frequency.
Our Vitec antiscalants inhibit scale while also dispersing colloidal particles. The inhibition and dispersant properties of Vitec products help extend system run times, reduce cleaning frequency and increase the productive life of RO elements. The Vitec 8000 series antiscalants are part of our Green Chemicals line, specially formulated for sites with discharge restrictions.
Vitec® 3000
Vitec® 3000 is a powerful, broad spectrum, liquid antiscalant and dispersant that is compatible with organic coagulants. It is highly effective at low dose rates and in a wide range of feedwaters and is certified for use in systems producing drinking water.
Vitec® 5100
Vitec® 5100 is a broad spectrum, liquid antiscalant and dispersant that is compatible with organic coagulants, effective at low dose rates and approved for use in systems producing drinking water. It is particularly cost-effective in seawater and municipal applications.
Vitec® 1500
Vitec® 1500 is a liquid antiscalant designed to inhibit or reduce calcium fluoride, calcium sulfate, calcium carbonate, calcium phosphate, barium sulfate, and strontium sulfate scale.
Vitec® 2000
Vitec® 2000 is a liquid antiscalant and dispersant used in feedwaters that have a wide range of scaling challenges or where there is a high level of iron to be dispersed.
Vitec® 4000
Vitec® 4000 is a liquid antiscalant and dispersant that offers excellent silica scale inhibition and allows increased system recoveries in high silica feedwaters. It is certified for use in systems producing drinking water.
Vitec® 7000
Vitec® 7000 is a multicomponent liquid antiscalant and dispersant that provides a high level of sulfate inhibition and allows increased RO system recoveries in challenging waters.
Vitec® 1000
Vitec® 1000 is a liquid antiscalant used when the potential for colloidal and silt fouling of membranes is low. This formulation is compatible with all RO membranes and is certified for use in systems producing drinking water.
Vitec® 8200
GreenVitec® 8200 liquid antiscalant and dispersant is free of phosphate and phosphonate. This all-polymer blend is compatible with all membrane types and is NSF certified for use in systems producing drinking water.
Vitec® 1100
Vitec® 1100 is a cost effective, liquid antiscalant designed to specifically inhibit calcium carbonate, metal oxides, silica, and mineral scale in municipal feedwaters where there is potential for concentrations of inorganic fouling.
Vitec® 1200
Vitec® 1200 is a liquid antiscalant designed with enhanced scale control to inhibit iron metal oxides, silica, and mineral scale in large capacity membrane systems.
Vitec® 1400
Vitec® 1400 is a liquid antiscalant designed to inhibit calcium carbonate, calcium sulfate, metal oxides, silica, barium and strontium scale in municipal feedwaters where there is potential for high concentrations of inorganic fouling, or high hardness ground waters.
Vitec® 1500
Vitec® 1500 is a liquid antiscalant designed to inhibit or reduce calcium fluoride, calcium sulfate, calcium carbonate, calcium phosphate, barium sulfate, and strontium sulfate scale.
Vitec® 5000
Vitec 5000 is a liquid antiscalant and dispersant used to control scale and inorganic fouling in a variety of feedwater pH ranges. It is a powerful inhibitor against carbonate and sulfate scales and is certified for use in systems producing drinking water.
Vitec® 3000
Vitec® 3000 is a powerful, broad spectrum, liquid antiscalant and dispersant that is compatible with organic coagulants. It is highly effective at low dose rates and in a wide range of feedwaters and is certified for use in systems producing drinking water.
Vitec® 5100
Vitec® 5100 is a broad spectrum, liquid antiscalant and dispersant that is compatible with organic coagulants, effective at low dose rates and approved for use in systems producing drinking water. It is particularly cost-effective in seawater and municipal applications.
Vitec® 7000
Vitec® 7000 is a multicomponent liquid antiscalant and dispersant that provides a high level of sulfate inhibition and allows increased RO system recoveries in challenging waters.
Membrane Cleaners
AvistaClean® and RoClean formulations are proprietary, membrane compatible cleaners that provide efficient and cost-effective removal of all common foulants. AvistaClean and RoClean products come in a variety of pH ranges and include liquids or powders. Many are certified for use in potable water systems. They’re powerful against organic and inorganic foulants and compatible with all membranes. Several cleaners are classified as Green Chemicals to help customers meet strict environmental discharge limits. The cleaners in our Green Chemicals line are the highest performing green cleaners in the industry.
AvistaClean® P312
AvistaClean® P312 powder is a multicomponent, high pH buffered cleaner formulated to remove a combination of organic and particulate foulants from membranes.
AvistaClean® P611 Green
AvistaClean® P611 powder is free of phosphate and EDTA. It dissolves organic foulants such as humic acids, fatty acids, siloxane compounds, fungicides, pesticides and pharmaceutical compounds. It’s highly buffered to resist pH changes during the cleaning process, and it’s NSF certified for off-line use in drinking water systems.
RoClean P111
RoClean P111 powder is a multicomponent, high pH buffered cleaner formulated to remove biological fouling in the presence of hydrophobic and hydrophilic organics and particles, such as clay, from membranes.
RoClean P112
RoClean P112 powder is a multicomponent, high pH buffered cleaner specifically formulated to safely remove silica scale from membranes.
RoClean P303
RoClean P303 powder is a multicomponent, low pH buffered cleaner formulated to remove metal foulants and calcium carbonate from membranes.
RoClean P703
RoClean P703 powder is a multicomponent, low pH buffered cleaner formulated to remove metal foulants such as iron, manganese and aluminum from membranes.
RoClean P903
RoClean P903 is a low pH powdered cleaner designed to remove iron, manganese, and aluminum deposits from spiral wound polyamide and cellulose acetate elements.
RoClean P911
RoClean P911 powder is a multicomponent, high pH buffered cleaner formulated to remove particularly high levels of organics, including humic and fulvic acids.
AvistaClean® P312
AvistaClean® P312 powder is a multicomponent, high pH buffered cleaner formulated to remove a combination of organic and particulate foulants from membranes.
AvistaClean® P611 Green
AvistaClean® P611 powder is free of phosphate and EDTA. It dissolves organic foulants such as humic acids, fatty acids, siloxane compounds, fungicides, pesticides and pharmaceutical compounds. It’s highly buffered to resist pH changes during the cleaning process, and it’s NSF certified for off-line use in drinking water systems.
RoClean P111
RoClean P111 powder is a multicomponent, high pH buffered cleaner formulated to remove biological fouling in the presence of hydrophobic and hydrophilic organics and particles, such as clay, from membranes.
RoClean P112
RoClean P112 powder is a multicomponent, high pH buffered cleaner specifically formulated to safely remove silica scale from membranes.
RoClean P303
RoClean P303 powder is a multicomponent, low pH buffered cleaner formulated to remove metal foulants and calcium carbonate from membranes.
RoClean P703
RoClean P703 powder is a multicomponent, low pH buffered cleaner formulated to remove metal foulants such as iron, manganese and aluminum from membranes.
RoClean P903
RoClean P903 is a low pH powdered cleaner designed to remove iron, manganese, and aluminum deposits from spiral wound polyamide and cellulose acetate elements.
RoClean P911
RoClean P911 powder is a multicomponent, high pH buffered cleaner formulated to remove particularly high levels of organics, including humic and fulvic acids.